Chine Fournir une production d'énergie dédiée Fabricants

toutes catégories

nouveaux produits

Accueil > Liste de Produits > Groupe électrogène diesel > Fournir une production d'énergie dédiée

Informations de base

Modèle: HC20GF-HC800GF

Description du produit

Fournir une production d'énergie dédiée
300KW type ouvert générateur diesel:

1. Specification of genset
Gensets model				HX-300GF
Prime power				300KW
Rated Voltage				380/220V
Rated frequency(HZ)				50
Rated Speed				1500rpm
Power Factor				0.8(lagging)
Dimensions(mm) (L×W×H)				3150×950×1800
Net Weight(kg)				2800
2. Specification of diesel engine
Engine brand				Cummins
Engine model				NTA855-G2A
Number of Cylinders				6
Cylinder arrangement				Vertical in line
Cycle				Four stroke
Aspiration				Turbocharged, Water/Air Cooling
Bore×Stroke (mm×mm)				140 x 152
Displacement (Liter)				14
Compression Ratio				14.0:1
Speed Governor				Electrical
Cooling System				Forced Water Cooling Cycle
Total lubrication system capacity (L)				38.6
Fuel Consumption at 100% Load (g/kWh)				192.6
Starting Method				DC24V Electrical starting
3. Specification of alternator
Alternator brand				Kaijieli(China-French joint venture Leory Somer technology)
Alternator model				TWGⅡ314EC
Number of Phase				3
Connecting Type				3 Phase and 4 Wires
Number of Bearing				1
Protection Grade				IP22
Altitude				≤1000m
Exciter Type				Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire
Insulation Class				H
Telephone Influence Factor (TIF)				≤50
THF				≤2%
Voltage Regulation, Steady State				≤±1%
Transient State Voltage				≤-15%~+20%
4. Specification of control Panel(with GU620A controller)
The control panel is ATS control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function.
The features of GU620A controller:
GU620A is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and perfectly improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory.
The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED’s.
• True RMS measure of voltage and current.
• Multi-Language menu.
• 128 x 64 pixel LCD display.
• 4 analog inputs for kinds of optional sensors that can be used for measuring oil pressure, coolant temperature, fuel level and so on; parameters can be configured by user.
• More outputs of configurable auxiliary control relays.
• More configurable isolated digital inputs.
• Buttons on control panel are used for selecting control modes, starting and stopping the operating procedure, displaying data and modifying the parameters. LED indicators are used for indicating the operation mode of controller and the running status of Genset, and LCD displays each measuring parameter and status.
• Flexible equipped with RS485, RS232 and USB, realizing remote monitor; or communicated with PC, fully realizing functions of remote signaling, telemetering and remote control, can read and set the running parameters of controller.
• With GPRS-DTU or Ethernet-DTU for remote communication instead of RS485, RS232, or USB port for remote communication.
• Optional CANbus, read and control the parameters for ECU engine.
• All connections of the controller are by secure plug and socket, for ease and convenience to connect, move, maintain and replace the device.